.375 Di stock Sample file needed

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
BillB
Posts: 447
Joined: Thu Jul 15, 2021 1:43 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

.375 Di stock Sample file needed

Post by BillB »

I’m wondering if there is a sample files repository here on the forum? I looked in the All Acorn documentation but don’t see anything like that and not finding anything in the sample parts Acron directories with a small diameters.

I’m looking for a proven part file that is set up for gang tool lathe I can use for my final machine set up and testing. Since I’m still new to cnc lathe work and programming for turning I would like to start with a NC file that is fully verified. I need a simple file for 3/8 stock with just some simple OD turning and cut off.

Anyone have a file they can share? Still having some issues I’m unsure about and it would be nice to know the programming side of thing is not the issue. I’m programming in fusion so better yet if someone has a fusion file or intercon file is fine to.

Thanks.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: .375 Di stock Sample file needed

Post by cnckeith »

create it in Intercon. Intercon exports 'good' centroid g code. so this eliminates any issues from post processors etc..
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply