Can I modify the Fusion 360 milling POST to include a dwell time, the machine is moving into the part before the spindle has reached the appropriate speed.
I have been able to manually add a dwell time but hoped I could modify the post. N36 G4 P5 is what I used for the dwell
Fusion 360 Post Edit
Moderator: cnckeith
-
- Posts: 9
- Joined: Tue May 10, 2022 12:14 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 5905
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Fusion 360 Post Edit
If you modify the M3 macro, the dwell will be there no matter what post you use, or where your code comes from.
I'm a firm believer that you should modify macros for machine specific behavior and not posts. If a particular machine takes a certain amount of time for the spindle to reach speed,or needs to orient the spindle for tool change, those actions should in macros for that machine.
That way you can run the same code on multiple machines and it will work right - waiting the appropriate amount of time for each individual machine. You can run code a friend gives you and not have to remember to add a spindle dwell.
Of course, you can modify the post to add a dwell if that is what you want. F360 posts are fully customizable.
I'm a firm believer that you should modify macros for machine specific behavior and not posts. If a particular machine takes a certain amount of time for the spindle to reach speed,or needs to orient the spindle for tool change, those actions should in macros for that machine.
That way you can run the same code on multiple machines and it will work right - waiting the appropriate amount of time for each individual machine. You can run code a friend gives you and not have to remember to add a spindle dwell.
Of course, you can modify the post to add a dwell if that is what you want. F360 posts are fully customizable.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 573
- Joined: Wed Aug 29, 2018 11:15 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 985DADEB24D5-0309180716
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Fusion 360 Post Edit
I modified the Fusion 360 Post Processor to add CNC12 specific features and it does have a Post Processor Property that allows to add a dwell factor and the dwell time will be calculated based on the demanded RPM of the tool.justcrankinit wrote: ↑Tue Aug 09, 2022 12:06 pm Can I modify the Fusion 360 milling POST to include a dwell time, the machine is moving into the part before the spindle has reached the appropriate speed.
I have been able to manually add a dwell time but hoped I could modify the post. N36 G4 P5 is what I used for the dwell
The Post Processor can be downloaded at the bottom of this Post.
Checkout the Enhanced Fusion 360 Milling Post Processor for Centroid CNC12 User Guide for all the details of the Post Processor.
-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp
Contact me at swissi2000@gmail.com
-
- Posts: 9
- Joined: Tue May 10, 2022 12:14 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 5905
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Fusion 360 Post Edit
Thanks @swissi! I saw this in earlier threads but hadn't tested it yet.
-
- Posts: 369
- Joined: Thu Nov 15, 2018 10:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7CBF8b-103011290
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Fusion 360 Post Edit
As noted you can also just modify the M3 macro by adding dwell time. That is what I did long ago and has worked great.