Simultaneous 4 axis moves on a lathe

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Stephan
Posts: 65
Joined: Thu May 12, 2022 2:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Simultaneous 4 axis moves on a lathe

Post by Stephan »

Great Uwe
Have you already tried to change the tool orientation maybe it will work then.
I took the PP from a Haas st35ly, it works but you have to delete a little stuff.
Don't know why, but I have the feeling that the feed speeds are not the actual ones. This feels as if the feed of the jaw chuck is slower.
No idea why.

Super Uwe
Hast du schon probiert die Werkzeug Orientierung zu ändern vielleicht gehts dann.
Ich habe den PP von einer Haas st35ly genommen der geht aber man muss bissel Zeug löschen.
Weiß nicht warum aber Ich habe das Gefühl als würden die Vorschub Geschwindigkeit nicht dem tatsächlichen entsprechen. Das fühlt sich an als wäre der Vorschub des Backenfutters langsamer.
Kein Plan warum.
occustoms
Posts: 129
Joined: Sun Jan 27, 2019 3:51 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: No

Re: Simultaneous 4 axis moves on a lathe

Post by occustoms »

care to share how you did the macos to go from c axis to spindle rpm with the button. I have 2 lathes that have vfd and encoders on them and would like to add live tooling to them. would be awesome.
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Simultaneous 4 axis moves on a lathe

Post by suntravel »

occustoms wrote: Wed Oct 12, 2022 4:35 am care to share how you did the macos to go from c axis to spindle rpm with the button. I have 2 lathes that have vfd and encoders on them and would like to add live tooling to them. would be awesome.

sure, you can find this here:

https://centroidcncforum.com/viewtopic. ... 405#p66405

Uwe
Post Reply