I made a manual how I set up C-Axis with clutch and stepper on my lathe.
All files you need to use it are here also.
And this shows how it runs on my lathe:
Uwe
C-Axis Manual for Acorn with second drive and clutch
Moderator: cnckeith
-
- Posts: 1982
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
C-Axis Manual for Acorn with second drive and clutch
- Attachments
-
- CAxis _Manual.pdf
- (1015.34 KiB) Downloaded 59 times
-
- DriveCalc.xls
- (14 KiB) Downloaded 20 times
-
- cnct.hom
- (2.54 KiB) Downloaded 25 times
-
- acorn_lathe_plc.src
- (286.88 KiB) Downloaded 20 times
-
- plcmsg.txt
- (2.93 KiB) Downloaded 19 times
-
- mfunc57.mac
- (747 Bytes) Downloaded 22 times
-
- mfunc55.mac
- (652 Bytes) Downloaded 22 times
-
- mfunc53.mac
- (624 Bytes) Downloaded 20 times
-
- mfunc52.mac
- (850 Bytes) Downloaded 20 times
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: C-Axis Manual for Acorn with second drive and clutch
nice work! thanks for sharing, i'll make a copy of this thread and put into knowledge base.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html