Hoping someone has mercy on me!
I am starting to retrofit an Emco Concept Mill 55 with a Centroid Acorn in my classroom. I am a teacher and by no means an expert at this sort of thing. I think I have most of the info I need, but am unsure how to properly wire the original Lenze VFD. Would anyone happen to have any schematics that show how to wire the VFD to the Centroid Acorn? The VFD is the Lenze e823v751. Here is a link: https://download.lenze.com/TD/E82EV__82 ... -0__EN.pdf. I think page 194 gives the necessary info. The inputs/ outputs currently used by the original ACC system are: 62, 7, 8, 28, E1, E4, 39, A1 and 59. I know where some of these would connect, but am unsure of others. Please let me know if you need additional info.
Thank you in advance!
Jerry
Emco Concept Mill 55 w/ Lenze VFD
Moderator: cnckeith
-
- Posts: 101
- Joined: Mon Mar 03, 2014 4:24 pm
- Allin1DC CNC Controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Emco Concept Mill 55 w/ Lenze VFD
Jerry,
Hello.
It looks like this connection configuration should work. Wiring and Wizard i/o settings PDF attached.
Hello.
It looks like this connection configuration should work. Wiring and Wizard i/o settings PDF attached.
- Attachments
-
- Lenze_VFD-DRAFT.pdf
- (144.55 KiB) Downloaded 36 times
When requesting support READ THIS POST first. viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
- Posts: 2
- Joined: Tue Jun 21, 2022 9:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Emco Concept Mill 55 w/ Lenze VFD
Hello!
You have just made my day! THANK YOU! I can't wait to use what you sent me and hook everything up when I return to school in two weeks! It (almost) makes me excited to return .
Thanks again!
Jerry
You have just made my day! THANK YOU! I can't wait to use what you sent me and hook everything up when I return to school in two weeks! It (almost) makes me excited to return .
Thanks again!
Jerry
-
- Posts: 7
- Joined: Sun Nov 26, 2023 1:37 am
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Emco Concept Mill 55 w/ Lenze VFD
How did you hookup the individual drives? Curious if you have photos of the box and layout! Thanks so much.
-
- Posts: 7424
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Emco Concept Mill 55 w/ Lenze VFD
not a mill but emco lathe start to finish.Allthewatts wrote: ↑Mon Apr 15, 2024 10:28 pm How did you hookup the individual drives? Curious if you have photos of the box and layout! Thanks so much.
https://centroidcncforum.com/viewtopic. ... 4&start=10
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html