907 x axis travel exceeded

[cmss]

While trying to mill my router table top, I am getting this warning upon file start up: 907 x axis travel exceeded 33.=>n360 G1 x 119.875.
When I go to wizard, I get this error message: XML doc.(1,2)

[ShawnM]

First, you are running version 4.20 which is I don't know how old, you should upgrade to the latest 4.64 software for free support.

With a quick glance at your report your X limit on the machine is 119.8642 and you are asking it to move 119.875

[cnckeith]

and 12,800 steps per rev and
1.24 revs per inch.. hmmm probably need to review this post.
https://centroidcncforum.com/viewtopic.php?f=63&t=1801