HUAN YANG HY Series VFD, Need parameters to control speed <resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
arteliquido
Posts: 12
Joined: Fri Jun 03, 2022 6:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0CB2B7D433E0-0813203618
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

HUAN YANG HY Series VFD, Need parameters to control speed <resolved>

Post by arteliquido »

I had a Sunfar VFD which I completely gave up on it, so I bought a HuanYang HY series that was straight forward to wire with the files found on Centroid forum. Now the only problem I have is that I can start the spindle from CNC12 but I can not control the speed. Can somebody please tell me what are the parameters that I have to put on the VFD to be able to control it. It's a 24000 RPM spindle water cooled. And if I have to do anything in CNC12. Thank you.
Upnorth
Posts: 237
Joined: Wed Apr 01, 2020 8:23 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1702
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by Upnorth »

Look in the manual for a parameter that sets the VFD to be controlled by an external voltage source.
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by ShawnM »

It would be super helpful to us if you’d post a link to the PDF manual for your VFD. We can’t possibly know which model VFD you have and guess at which parameter needs changing.
arteliquido
Posts: 12
Joined: Fri Jun 03, 2022 6:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0CB2B7D433E0-0813203618
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by arteliquido »

ShawnM wrote: Sun Jun 26, 2022 7:59 am It would be super helpful to us if you’d post a link to the PDF manual for your VFD. We can’t possibly know which model VFD you have and guess at which parameter needs changing.
I'm attaching the manual. Thank you for your help.
Attachments
HY01D523B-VFD-Manual.pdf
(12.13 MiB) Downloaded 38 times
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by ShawnM »

Thanks, try setting parameter Pd002 to a value of 1 and report back.
Also make sure you setup the wizard properly with your spindle speed parameters.
arteliquido
Posts: 12
Joined: Fri Jun 03, 2022 6:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0CB2B7D433E0-0813203618
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by arteliquido »

ShawnM wrote: Sun Jun 26, 2022 6:27 pm Thanks, try setting parameter Pd002 to a value of 1 and report back.
Also make sure you setup the wizard properly with your spindle speed parameters.
Hi, I already changed it. I can turn the spindle on from centroid but can't control the speed. And for the connections I followed the diagram scheme from centroid. I''m attaching it. Thank you.
Attachments
S14984.r3.pdf
(144.42 KiB) Downloaded 44 times
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by ShawnM »

Did you do the spindle bench test per the manual? Is the voltage output correct? Do you have the spindle parameters set in the wizard? Do you have all the other parameters in the VFD set up properly? Can you control the speed from the pot of the front of the VFD after it turns on?
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by cncsnw »

Don't Huan Yang VFDs have a jumper you have to move (to a "VI" position) before the 0-10V analog input will work?
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by ShawnM »

Correct Marc, to the right of the control terminals there is a jumper, J1, with 3 pins numbered 1,2 and 3. He needs to short pins 1 and 2 with the jumper for control from and external connection. I've never wired one of these VFD's and wasn't familiar with the jumper it has.
arteliquido
Posts: 12
Joined: Fri Jun 03, 2022 6:28 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0CB2B7D433E0-0813203618
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: HUAN YANG HY Series VFD, Need parameters to control speed

Post by arteliquido »

ShawnM wrote: Wed Jun 29, 2022 6:29 pm Correct Marc, to the right of the control terminals there is a jumper, J1, with 3 pins numbered 1,2 and 3. He needs to short pins 1 and 2 with the jumper for control from and external connection. I've never wired one of these VFD's and wasn't familiar with the jumper it has.
Yes, you were correct. Moved the pin and it's working perfect. Thank you very much for all your help!!!
Post Reply