Acorn CNC12 v4.80 has been released. (8-12-22)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by suntravel »

One reason could be that the probe shorts with a broken wire...

Uwe
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by CNCMaryland »

cnckeith wrote: Fri Oct 21, 2022 1:49 pm more info on the tool touch off setup please.
Its a basic 2 wire touch off. However, when the error occurred, the software shut down when I hit cycle start to begin the tool measurement. It never got to the tool touch off.

I've been unable to replicate the error since.
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by CNCMaryland »

Caught it on video today.

suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by suntravel »

Video is private...
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by CNCMaryland »

suntravel wrote: Sat Oct 22, 2022 5:45 pm Video is private...
Ooops, sorry, fixed now.
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by CNCMaryland »

Report run right after.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by cnckeith »

thanks, we've been looking into this for a few days now.. we can not get is to happen

can you give us step by step actions you are taking to get it to occur?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
CNCMaryland
Posts: 369
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: F045DA7CBF8b-103011290
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by CNCMaryland »

cnckeith wrote: Tue Oct 25, 2022 2:13 pm thanks, we've been looking into this for a few days now.. we can not get is to happen

can you give us step by step actions you are taking to get it to occur?
At this point I did a full delete and re-install, and it has gone away.
Aurelien
Posts: 38
Joined: Mon Oct 17, 2022 6:17 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF8D294B-0211225688
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by Aurelien »

Hello. I have just updated to V4.80 and I have the VCP which is no longer displayed.

I also just realized that all my tool data has disappeared... is there a way to recover them or do I have to redo them all?
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Acorn CNC12 v4.80 has been released. (8-12-22)

Post by suntravel »

you can copy the tool lib from the old installation to the new 4.8

4.8 needs the newest updates for windows

Uwe
Post Reply