New Build: Emco F1F_V00 Concept Mill 55 ATC

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Loatest
Posts: 1
Joined: Fri May 21, 2021 2:26 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: C152525
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

New Build: Emco F1F_V00 Concept Mill 55 ATC

Post by Loatest »

Hi all,
Recent reader, first time poster.

I picked up an Emco Concept Mill 55 with mist coolant and ATC and want to retrofit it with the Acorn CNC controller. I've not done this before and am studying up on schematics and VFDs but have not touched a single wire as of this writing, inside any machine other than a shapeoko.

I read through the posts for the PC Turn 55 Lathe ( which I also have) but after a year of part time study am still reluctant to meddle with innards despite having a really clear schematic for the acorn. I'm hoping that I can through this project help other mill owners by producing a good guide and have the wherewithall to pull some wires and finally start making chips!

I read through cnckeith s prepost guide and set up photo links etc and hope this will be helpful to someone after me.

If you've been down this road or one like it, I'd love to hear your story!
Thanks

SOFTWARE:
Acorn 4.64
CNC12
E062347DEFD2-0427214706
MPU12 SYSTEM

Windows 10 Pro version 20H2 64 bit
Version Build 19042.1052

HARDWARE:
i5 4570-T 2.90 Ghz
12.0 GB RAM
256GB SSD

Link to electrical schematics
https://photos.app.goo.gl/fwQEDCpVCe7RhYZ87

Link to internal images
https://photos.app.goo.gl/MtKxxdo73WTy195p8

Link to components
VFD: LENZE E82EV751-2C
https://download.lenze.com/TD/E82EV__82 ... -0__EN.pdf
Post Reply