Gary Campbell wrote: ↑Tue May 24, 2022 5:44 pm
I use solenoids with LEDs, which should accomplish the goal. If not then I go to a 1N404/5 diode
Thanks Gary! Glad to know I'm not off base here.
Re: New Build: PM-30MV ClearPath Acorn
Posted: Wed May 25, 2022 11:28 pm
by 406JLM
suntravel wrote: ↑Wed May 25, 2022 5:06 am
If you want to get most performance from the PM 30 ( I have a similar one ) consider to learn scraping to make it a bit more rigid running.
Uwe
Interesting. I need to learn more about this. It's not readily apparent to me how scraping can increase rigidity. I'll put it on the list of things to learn after I get the mill up and running. Thanks for the video!
Re: New Build: PM-30MV ClearPath Acorn
Posted: Thu May 26, 2022 12:09 am
by suntravel
The structure itself will not become more rigidity from scraping, but to get the sliding surfaces even so they have full contact makes ist possible to have a minimum of play with smooth movement. So vibration/scattering occurs later.
This is what I do first with cheap machines, complete disassemble and rework all sliding and mounting surfaces for perfect geometry and smooth movement.
You can do this together with installing the oiling system.