Acorn and Emcoturn 120 with 8-tools-turret
Posted: Mon Apr 11, 2022 3:56 pm
Hello guys,
my name is Marc, i live in germany and i own an mechanics-only Emco cnc-lathe, Emcoturn-120, that i want to retrofit.
I already built 2 cnc-routers and 1 cnc-mill with Mach3, EdingCNC, CNC-Graf and Beamicon2 (last 2 are german controllers). But none of them is good for lathe-use, so i came to Acorn.
But i have a question regarding especially the tool-turret:
Is it possible to drive this 8-tools-turret with acorn?
Now, there is a 24V-Motor mounted, that works like described here: https://emcocncretrofits.fandom.com/wik ... oolchanger
Will i be able to drive this machine with acorn only?
2 axis (CL-steppers or JMC-servos, i think), limit-switches and home-switches, 8-tools-turret, spindle-encoder (360ppr), vfd-spindle-motor (removed the DC-spindle-motor because no driver available for this in-line-shunt-motor with 7,5kW).
Maybe someone can give an estimate, if this could be possible with only the acorn.
Thank you very much and with best regards,
Marc
my name is Marc, i live in germany and i own an mechanics-only Emco cnc-lathe, Emcoturn-120, that i want to retrofit.
I already built 2 cnc-routers and 1 cnc-mill with Mach3, EdingCNC, CNC-Graf and Beamicon2 (last 2 are german controllers). But none of them is good for lathe-use, so i came to Acorn.
But i have a question regarding especially the tool-turret:
Is it possible to drive this 8-tools-turret with acorn?
Now, there is a 24V-Motor mounted, that works like described here: https://emcocncretrofits.fandom.com/wik ... oolchanger
Will i be able to drive this machine with acorn only?
2 axis (CL-steppers or JMC-servos, i think), limit-switches and home-switches, 8-tools-turret, spindle-encoder (360ppr), vfd-spindle-motor (removed the DC-spindle-motor because no driver available for this in-line-shunt-motor with 7,5kW).
Maybe someone can give an estimate, if this could be possible with only the acorn.
Thank you very much and with best regards,
Marc