New Router Finished with a tip and a possible bug
Posted: Mon Mar 07, 2022 1:39 pm
Hi all,
This is my second machine, and it started up easily. It needs some side panels, dust shoe, etc., but everything works. I'll post in the Success Stories once I have a video of it cutting along with more detailed pictures also, but here is what it looks like- So the "tip" is that I had a problem with unstable analog voltage (again,) and a .1mfd capacitor as shown made it rock solid, again. This time speed was stable except during axis movement. I think it's more of an impedance problem rather than noise. The possible Bug may be intentional. With my configuration, no axis brake release would work on output 2, but (axis 3 at least) works on output 3. I attached a report in case anyone wants to look.
Kevin
This is my second machine, and it started up easily. It needs some side panels, dust shoe, etc., but everything works. I'll post in the Success Stories once I have a video of it cutting along with more detailed pictures also, but here is what it looks like- So the "tip" is that I had a problem with unstable analog voltage (again,) and a .1mfd capacitor as shown made it rock solid, again. This time speed was stable except during axis movement. I think it's more of an impedance problem rather than noise. The possible Bug may be intentional. With my configuration, no axis brake release would work on output 2, but (axis 3 at least) works on output 3. I attached a report in case anyone wants to look.
Kevin