Hi all,
This is my second machine, and it started up easily. It needs some side panels, dust shoe, etc., but everything works. I'll post in the Success Stories once I have a video of it cutting along with more detailed pictures also, but here is what it looks like-
So the "tip" is that I had a problem with unstable analog voltage (again,) and a .1mfd capacitor as shown made it rock solid, again. This time speed was stable except during axis movement. I think it's more of an impedance problem rather than noise.
The possible Bug may be intentional. With my configuration, no axis brake release would work on output 2, but (axis 3 at least) works on output 3. I attached a report in case anyone wants to look.
Kevin
New Router Finished with a tip and a possible bug
Moderator: cnckeith
-
- Posts: 58
- Joined: Thu May 16, 2019 8:42 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 780473842B28-0131191600
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
New Router Finished with a tip and a possible bug
- Attachments
-
- report_E0623462B3BF-0510214768_2022-03-07_08-40-00.zip
- (640.41 KiB) Downloaded 44 times