New Router Finished with a tip and a possible bug

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
kevincnc
Posts: 58
Joined: Thu May 16, 2019 8:42 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 780473842B28-0131191600
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

New Router Finished with a tip and a possible bug

Post by kevincnc »

Hi all,
This is my second machine, and it started up easily. It needs some side panels, dust shoe, etc., but everything works. I'll post in the Success Stories once I have a video of it cutting along with more detailed pictures also, but here is what it looks like-
20220305_114802.jpg
20220306_104430.jpg
So the "tip" is that I had a problem with unstable analog voltage (again,) and a .1mfd capacitor as shown made it rock solid, again. This time speed was stable except during axis movement. I think it's more of an impedance problem rather than noise.
20220306_104713.jpg
The possible Bug may be intentional. With my configuration, no axis brake release would work on output 2, but (axis 3 at least) works on output 3. I attached a report in case anyone wants to look.
Kevin
Attachments
report_E0623462B3BF-0510214768_2022-03-07_08-40-00.zip
(640.41 KiB) Downloaded 44 times
Post Reply