Centroid Community CNC Support Forum

I would rather repin a connector than splice the cables between my Acorn and Logosol drives.
The connector says MXN-15 2695
My guess would be Molex but cant find any such model.
This is an 8 pin connector but I am interested in the pins themselves. Any help would be great. I seem to see this style connector often.

Those are called KK connectors. Also commonly called Waldom connectors. There are a couple different common sizes, identified by the pin pitch.

See http://www.mattmillman.com/info/crimpconnectors/#kk100, or http://www.mattmillman.com/info/crimpconnectors/#kk156

Components are readily available from Digikey and others.

Thanks so much, got them ordered

Those worked out very well.
Originally I was going to put a din rail and terminals to extend the cables.
This turned out much cleaner and the cables will go direct to the Acorn. Much less potential for noise and errors.