Which Schematic for DM860T

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
n8awol
Posts: 17
Joined: Fri Jan 21, 2022 1:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: e062346fe6b5-1207215421
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Which Schematic for DM860T

Post by n8awol »

Im sure there is an easy answer but I just want to triple check which schematic I'm using for that driver? Doing some pre-wiring before it arrives. Thanks all!
Nate
n8awol
Posts: 17
Joined: Fri Jan 21, 2022 1:26 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: e062346fe6b5-1207215421
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Which Schematic for DM860T

Post by n8awol »

Anyone at all? I appear to have gotten there new "digital" version. Im sure its a lack of knowledge of what to read about/search for just a nudge in the right direction would really be appreciated. Is there a guide somewhere speaking to how to set the pulses/rev, and given my motors are 5a Im assuming I use the 5.14a peak current setting?
tempImageQmd9Dr.gif
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Which Schematic for DM860T

Post by Gary Campbell »

Connect to the DB25 header and use the LeadShine schematic that shows that. Ignore the "BRK" & "ENA" terminals to test
5.14 peak would be my choice (or 1st one below)
set step resolution to either 1600 or 3200 and match in Acorn Wizard
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Post Reply