Leadshine Drivers & Acorn Header connections

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Leadshine Drivers & Acorn Header connections

Post by martyscncgarage »

mujenpwr wrote: Mon Jan 24, 2022 9:46 pm No install yet. He has an existing Mach3 install that he asked me to help convert to Acorn. He is building a list of items to convert. Mine went so well and he likes the Intercon conversational programming. so much he wants to move to Acorn.
I'm confused. This is why we ask for photos.
You said there was no access to the DB25?
You haven't installed Acorn yet....so, make sure there is access to the DB25....
Use a larger cabinet if needed. Do the job right.

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
mujenpwr
Posts: 35
Joined: Wed Apr 21, 2021 7:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 4519
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Leadshine Drivers & Acorn Header connections

Post by mujenpwr »

Thanks for the info Marty and everyone. I am reviewing now and will do it right I know his cabinet is tight. Agree with upsizing to make it work via diagrams and DB25. Was trying to help him plan it out.
Post Reply