Wiring Confirmation

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Wiring Confirmation

Post by tuffduck »

I am using singe phase power, so it looks like some wires need to be removed, I am guessing both the green and white wires?
IMG_20220118_185416.jpg
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Wiring Confirmation

Post by ShawnM »

Absolutely, the green chassis ground or PE wire doesn't do through the contactor. All grounds from all your components need to go direct to your buss bar in the bottom center of your panel . This frees up another NO contact on your contactor, terminal 5 & 6, to use for the C86 blah blah blah. :mrgreen:

For single phase 120 or 240 power I run the white, neutral line through the contactor. Not everyone may do this.
Last edited by ShawnM on Wed Jan 19, 2022 12:28 pm, edited 1 time in total.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Wiring Confirmation

Post by martyscncgarage »

120V or 240V?
120V only the hot needs to go through the contactor
240V both hots need to go through the contactor

In either case, it frees up a contact for you to use for C86ACCP No Fault

This is why we ask you for pictures. We can not "SEE" what you "SEE"

Thank you for posting the picture
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Wiring Confirmation

Post by tuffduck »

Thanks Marty!
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Wiring Confirmation

Post by tuffduck »

I think I have it.
ccp wiring-Recovered.jpg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Wiring Confirmation

Post by martyscncgarage »

👍
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Wiring Confirmation

Post by tuffduck »

Thanks
Post Reply