VDF issues, 220v spindle issues
Posted: Sun Jan 16, 2022 7:35 pm
Here is a small video of what I'm dealing with.
https://linksharing.samsungcloud.com/hU9bZXtt9yqr
I have my VDF setting set to the attachment page. I found in this forum. I've also attached the wiring diagram I'm using as well
Issue 1: I keep getting a fault on the spindle that won't allow me to do anything.
2. Rmps are way too low for the tool I've set
3. Z- limit switch I don't think I have set correctly.
Any help would be appreciated!
Sam
https://linksharing.samsungcloud.com/hU9bZXtt9yqr
I have my VDF setting set to the attachment page. I found in this forum. I've also attached the wiring diagram I'm using as well
Issue 1: I keep getting a fault on the spindle that won't allow me to do anything.
2. Rmps are way too low for the tool I've set
3. Z- limit switch I don't think I have set correctly.
Any help would be appreciated!
Sam