Hello everyone,
I'm about 94% done with my retrofit and I wanted to make some Schematics specific to this machine to have in the control box. I was looking for one but didnt see anything. Id just want to have a picture of the Acorn and have blank I could fill in as to what is actually connected to each slot. Would be even cooler if it was a fillable PDF kind of thing, but just a printable sheet I could hand write into would be great too. Does one exist already? If one doesn't exist could one be made and added to the Schematics page?
Thanks for reading
Blank Schematic page?
Moderator: cnckeith
-
- Posts: 6
- Joined: Mon May 17, 2021 2:05 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 2190
- Joined: Fri May 24, 2019 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 7804734C6498-0401191832
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Clearwater, FL
Re: Blank Schematic page?
If you download the Acorn schematic files there's a DWG folder in there that has the actual CAD drawing for the schematics. You could open the "Basic Power and Communications, Bench Test" DWG schematic CAD file in your favorite CAD program and edit it yourself.
-
- Posts: 7166
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Blank Schematic page?
all DIY schematics are located here.
https://www.centroidcnc.com/centroid_di ... browse.php
two versions of every schematic are provided. a PDF and a .dwg the .dwg on on the left. see circled below.
https://www.centroidcnc.com/centroid_di ... browse.php
two versions of every schematic are provided. a PDF and a .dwg the .dwg on on the left. see circled below.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7166
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Blank Schematic page?
thanks.,ShawnM wrote: ↑Sat Jan 15, 2022 9:38 pm If you download the Acorn schematic files there's a DWG folder in there that has the actual CAD drawing for the schematics. You could open the "Basic Power and Communications, Bench Test" DWG schematic CAD file in your favorite CAD program and edit it yourself.
fyi...
the folder download has been discontinued in favor of a dynamic (updated all the time) searchable diy schematics web page. here is the link.
https://www.centroidcnc.com/centroid_di ... browse.php
if there are any old schematics zip file downloads still floating around..they contain old files please don't use those and always go to the new web page to download the latest and greatest. https://www.centroidcnc.com/centroid_di ... browse.php
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html