Probe gets to one end and just stays and moves up and down

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
shreddedcurbs
Posts: 92
Joined: Sat Nov 14, 2020 6:33 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Probe gets to one end and just stays and moves up and down

Post by shreddedcurbs »

Doing a surface digitizing. The probe will go across the object and come back (zig zag pattern selected) However every other time it goes back and forth at one end it will stay in one spot and just go up and down like very small, maybe 1/64" and keep doing that until I have to touch the probe and then it wakes up, continues and keeps going. Until it goes another two back and forth and does the same thing again.

What and why?
suntravel
Posts: 120
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 6433DB0446C1-08115074
Location: Germany

Re: Probe gets to one end and just stays and moves up and down

Post by suntravel »

Report please. Solution may be easy...

Uwe
Post Reply