New STEPPERONLINE Integrated Servo motor

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cnckeith
Posts: 3825
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: New STEPPERONLINE Integrated Servo motor

Post by cnckeith »

i think i read that you have a work bee? if so, you may be interested in francos vidoes on his workbee build, he has nine of them in a series, here is the last one.

Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
dtananko
Posts: 26
Joined: Sat Jan 01, 2022 3:44 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 5462

Re: New STEPPERONLINE Integrated Servo motor

Post by dtananko »

Keith, yes, I started with WorkBee and upgraded it to QueenBee. It is HUGE improvement in terms of smoothness of motion due to linear bearings instead of rollers. Here are some pics. As you can see I cannot fit anything bigger than 8mm lead screws.
I studied Franco (and Marty's) channel very closely and watched all WorkBee videos. He ended up putting ClearPath motors in it and getting reed of it. LOL.
Attachments
20220114_222744674_iOS.jpg
20220114_222715491_iOS.jpg
20220114_222702781_iOS.jpg
20220114_222652004_iOS.jpg
20220114_222627300_iOS.jpg
20220114_222617857_iOS.jpg
20220114_222614181_iOS.jpg
Best Regards,
Dmitry
tblough
Posts: 1865
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
Location: Boston, MA
Contact:

Re: New STEPPERONLINE Integrated Servo motor

Post by tblough »

8mm pitch screws would be 0.315" per rev.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
cnckeith
Posts: 3825
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: New STEPPERONLINE Integrated Servo motor

Post by cnckeith »

thanks for posting photos that helps alot!
make a fresh report.zip and post here as well
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
dtananko
Posts: 26
Joined: Sat Jan 01, 2022 3:44 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 5462

Re: New STEPPERONLINE Integrated Servo motor

Post by dtananko »

Here is the report. THanks.
Attachments
report_80F5B5F53BBF-1216215462_2022-01-14_18-05-16.zip
(156.27 KiB) Not downloaded yet
Best Regards,
Dmitry
dtananko
Posts: 26
Joined: Sat Jan 01, 2022 3:44 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 5462

Re: New STEPPERONLINE Integrated Servo motor

Post by dtananko »

Sorry, it took some time to write the file. Here is the better one.
Attachments
report_80F5B5F53BBF-1216215462_2022-01-14_18-05-16.zip
(628.9 KiB) Downloaded 2 times
Best Regards,
Dmitry
cnckeith
Posts: 3825
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: New STEPPERONLINE Integrated Servo motor

Post by cnckeith »

ok great. got better photos of the gantry screws? are these double lead screws?

with power off, tape and tape/ruler to the axis and line it up with the slide, mark the screw with a marker and grab the screw with your hand rotate it one revolution and then how far did the slide move?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
dtananko
Posts: 26
Joined: Sat Jan 01, 2022 3:44 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 5462

Re: New STEPPERONLINE Integrated Servo motor

Post by dtananko »

It is 8 mm move per revolution confirmed.
Best Regards,
Dmitry
cnckeith
Posts: 3825
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: New STEPPERONLINE Integrated Servo motor

Post by cnckeith »

great! that will work nice with 3D surfacing and our G code smoothing feature.
what kind (make/model) of stepper drives are currently being used? photos?
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
cnckeith
Posts: 3825
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: New STEPPERONLINE Integrated Servo motor

Post by cnckeith »

related in case you haven't seen this post.
https://centroidcncforum.com/viewtopic.php?f=57&t=3021
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply