Guys do you know, were can i find manual for automatic tool touch off ?
before i had setup acorn to automatically find tool touch off probe and move table there. but i cant find that manual anymore... what parameter was changed atc...
it was in that manual but cant find it
Thanks
Automatic tool touch Off
Moderator: cnckeith
-
- Posts: 369
- Joined: Thu Nov 15, 2018 10:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7CBF8b-103011290
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
Re: Automatic tool touch Off
Parameter 17
You need to specify the return point of the touch off location, G28, G30, etc.
You need to specify the return point of the touch off location, G28, G30, etc.
-
- Posts: 3097
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Automatic tool touch Off
And the manuals are located where all the other Centroid manuals are: https://www.centroidcnc.com/centroid_di ... nuals.html
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 62
- Joined: Mon Nov 15, 2021 5:06 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Automatic tool touch Off
Thanks mateCNCMaryland wrote: ↑Thu Jan 06, 2022 10:18 am Parameter 17
You need to specify the return point of the touch off location, G28, G30, etc.