Rotary axis moving when turning on controller box

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
guerra_cues
Posts: 129
Joined: Tue Nov 23, 2021 1:42 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF98CA2D-0813215079
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clarkston, WA
Contact:
Contact guerra_cues

Re: Rotary axis moving when turning on controller box

Post by guerra_cues »

martyscncgarage wrote: ↑Thu Jan 06, 2022 6:13 pm I don't know which Acorn or relay board you have, but the latest relay board as LEDs on it. Red=Off, Green+On
Relay board Out 1 on.jpg
I have the latest Acorn and relay board, unless something else newer came out in the last 3 months.
Thank you for the picture Marty.
Tony Maninha
www.facebook.com/guerracues

Using Centroid Acorn Router "Pro" CNC12
Top
suntravel
Posts: 1967
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 6433DB0446C1-08115074
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Germany

Re: Rotary axis moving when turning on controller box

Post by suntravel »

Oh sorry did not read that you meant the Acorn relays...

As Marty showed they have already a control LED.

Uwe
Top
Post Reply

Return to “Centroid Acorn CNC Controller”