after cutting first 4x8 sheet no heartbeat dead acorn
Moderator: cnckeith
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
after cutting first 4x8 sheet no heartbeat dead acorn
Waited a year to install. had about 40 hours total combined on this machine, maybe less. Came back after cutting a 4x8 sheet of MDF and now its no heart beat and green LEDs solid on the PSU and Green in corner (posted a photo next post)
Took the Beagle bone green off the board safely and did the debricking thing. When I plug in the cable the power LED blinks super fast 1 single blink and nothing. Nothing works. Cant find beaglebone green anywhere online. And who knows if that would even fix this.
I knew there was something off about this board.
Took the Beagle bone green off the board safely and did the debricking thing. When I plug in the cable the power LED blinks super fast 1 single blink and nothing. Nothing works. Cant find beaglebone green anywhere online. And who knows if that would even fix this.
I knew there was something off about this board.
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: after cutting first 4x8 sheet no heartbeat dead acorn
Only thing that's wired is the PSU
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: after cutting first 4x8 sheet no heartbeat dead acorn
Anyone?
If I remove beagleboard the same color lights on the acorn board stay lit
If I remove beagleboard the same color lights on the acorn board stay lit
-
- Posts: 7313
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: after cutting first 4x8 sheet no heartbeat dead acorn
posts to review.
https://centroidcncforum.com/viewtopic.php?f=63&t=2406
and
https://www.centroidcnc.com/centroid_di ... icker.html
https://centroidcncforum.com/viewtopic.php?f=63&t=2406
and
https://www.centroidcnc.com/centroid_di ... icker.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: after cutting first 4x8 sheet no heartbeat dead acorn
Already checked those posts and did the debricking procedure as I stated in my first post
-
- Posts: 7313
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: after cutting first 4x8 sheet no heartbeat dead acorn
Please ship the unit back we will repair or replace or refund your choice.
Please use RMA #35471
Ship to
Centroid
RMA #
159 Gates Rd.
Howard, PA 16841
Please use RMA #35471
Ship to
Centroid
RMA #
159 Gates Rd.
Howard, PA 16841
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 7313
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: after cutting first 4x8 sheet no heartbeat dead acorn
as stated in your other thread.
As soon as we receive the complete acorn kit we will refund the purchase price of the kit and the software.
please post the shipment tracking number and i suggest you insure the shipment.
sorry it didn't work out for you. good luck with your projects.
OR
if you have a non functioning Acorn and can't find a resolution here on the forum.
buy the swap out at $199
ship the non functioning Acorn to us for evaluation
if the Acorn is found to have manufacture issue we will repair or replace and ship back to you at no charge and refund the $199.
if the Acorn is found to have user inflicted issue we will repair or replace and ship back to you.
As soon as we receive the complete acorn kit we will refund the purchase price of the kit and the software.
please post the shipment tracking number and i suggest you insure the shipment.
sorry it didn't work out for you. good luck with your projects.
OR
if you have a non functioning Acorn and can't find a resolution here on the forum.
buy the swap out at $199
ship the non functioning Acorn to us for evaluation
if the Acorn is found to have manufacture issue we will repair or replace and ship back to you at no charge and refund the $199.
if the Acorn is found to have user inflicted issue we will repair or replace and ship back to you.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 100
- Joined: Sat Nov 14, 2020 6:33 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: after cutting first 4x8 sheet no heartbeat dead acorn
I don't have two weeks to have my machine down and out.
So what if the issue is just the beagle bone. It's a $60 part so you would still charge me $199?
So what if the issue is just the beagle bone. It's a $60 part so you would still charge me $199?