CNC12 DEMO MODE??

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: CNC12 DEMO MODE??

Post by cnckeith »

fyi.. the accelerated graphics mode is now the default mode for the next release.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Sword
Posts: 652
Joined: Fri Nov 30, 2018 1:04 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Thorp WI

Re: CNC12 DEMO MODE??

Post by Sword »

Here's a sample video of what the "RTG" screen could be like. That would be the "icing on the cake". ;)

https://rumble.com/vt7ksc-uccnc-toolpath-view.html
Scott
gerald martin
Posts: 90
Joined: Mon Oct 15, 2018 7:37 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: CNC12 DEMO MODE??

Post by gerald martin »

YES!
Post Reply