Error message <fixed>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

Re: Error message

Post by avp »

Hi Keith,
That is good news. Thank you, looking forward to it.
Bill
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Error message

Post by cnckeith »

you are welcome thanks for posting.. currently this is the only known bug (and a intermittent one at that) in v4.80... pretty happy about that! ;)
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Error message

Post by ShawnM »

So glad you guys found and fixed this. Looking forward to 4.81. It was driving me mad on my plasma table.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Error message

Post by cnckeith »

link to v4.81 BETA mill, lathe, router, plasma CNC12 installer with file management bug fixed, please test out..
if no issues arise from this build it will become v4.82 official release.

Its always best to do a fresh install and configure the system by hand using the Wizard. make screen shots of existing running install and a fresh report.zip. then use screen shots to reenter data and settings in new version Wizard. for plasma, Be sure to set plasma THC back to ON in the profile manager.

https://www.filemail.com/d/ykobkrjnchewpth

1.) Mill, Lathe, Router, Plasma: Fixed a rare intermittent file management bug that appears in some systems but not others. This solves the ”(OPEN) Error saving offset library” and ”(OPEN) Error saving tool library” issue.

2.) Plasma: Added Plasma oscilloscope plot button in Utility menu in CNC12 for opening the plot app inside of CNC12. Note the Centroid “Plot” program captures Actual Voltage, Position, Velocity for plasma machine performance analysis.

3.) Plasma: Restart mode improvements. Restart now supports M101 and Modified Feedrate by %

4.) Plasma: Plasma Intercon additions and improvements

- Profile Feedrate Override Percentage added to events
- dxf/svg events now have cut direction
- Canned cycles and kerf offset values are now modal
- Clicking/Double clicking event will save currently edited event
- Improved dxf/svg import
- Color Picker dialog loads with hex code and color selected
- Error catching for circular and rectangle frames
- Subprograms update more consistently
- F8 – Graph added to main screen
- F8 – Graph reworked
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

Re: Error message

Post by avp »

Installed 4.81, so far so good. We'll see how it goes.
Thank you
Bill
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Error message

Post by ShawnM »

I’ll install it on my plasma Monday as that’s where I’ve seen the file management bug. I also had the restart issue on my plasma but I was emailed a small workaround file from Centroid that has worked well. I have A LOT of 1/4” steel to cut in the coming weeks.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Error message

Post by cnckeith »

ShawnM wrote: Sat Oct 29, 2022 9:40 pm I’ll install it on my plasma Monday as that’s where I’ve seen the file management bug. I also had the restart issue on my plasma but I was emailed a small workaround file from Centroid that has worked well. I have A LOT of 1/4” steel to cut in the coming weeks.
plasma restart in v4.81 now supports M102 and %feedrate values.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Error message

Post by ShawnM »

Thanks Keith, looking forward to trying it out.
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Error message

Post by ShawnM »

cnckeith wrote: Fri Oct 28, 2022 3:09 pm link to v4.81 BETA mill, lathe, router, plasma CNC12 installer with file management bug fixed, please test out..
if no issues arise from this build it will become v4.82 official release.
So far so good on 4.81. Any update Keith on the official 4.82 release?
avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

Re: Error message

Post by avp »

Yes, all good here as well.
Post Reply