Axis is affected by VFD
Moderator: cnckeith
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Axis is affected by VFD
post link to photos of the machine so we can better help you.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 6
- Joined: Fri Dec 10, 2021 1:55 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Axis is affected by VFD
Thank you everyone for the response
We dont know how to read the set step/rev by manufacturer because we cannot find its manuals.
Anyone know this stepper driver?
"Y4A031011"
We're almost done with input and output for retrofitting this PC MILL 55.
The axis only giving us trouble.
Here is the link for the picture of machine and it's driver
https://drive.google.com/folderview ... k-5VshFd4
We dont know how to read the set step/rev by manufacturer because we cannot find its manuals.
Anyone know this stepper driver?
"Y4A031011"
We're almost done with input and output for retrofitting this PC MILL 55.
The axis only giving us trouble.
Here is the link for the picture of machine and it's driver
https://drive.google.com/folderview ... k-5VshFd4
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Axis is affected by VFD
I would replace the drives with modern common stepper drives. I wouldn't fight what you have. Might even replace the stepper motors as well
My .02
Marty
My .02
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 6
- Joined: Fri Dec 10, 2021 1:55 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Axis is affected by VFD
Thank you very much for help