When i ran Mach 3 /4 , i had 3 machines set up , i would just start the profile in the Mach loader that i wanted to run . Same machine with different attachments ( spindle - laser - rotary driven lathe ) . How can i setup acorn to do this ??
Ed
Setup profiles for Router - Laser - Lathe
Moderator: cnckeith
-
- Posts: 3100
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Setup profiles for Router - Laser - Lathe
Assuming all the limit switches and other connections remain the same, you can either keep a report for each setup and just restore rhe one you want to use, or you can keep separate directories for each setup and just rename the ones you want to use to CNCM and INTERCON.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.