Setup profiles for Router - Laser - Lathe

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
edcross
Posts: 4
Joined: Mon Nov 22, 2021 1:46 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Setup profiles for Router - Laser - Lathe

Post by edcross »

When i ran Mach 3 /4 , i had 3 machines set up , i would just start the profile in the Mach loader that i wanted to run . Same machine with different attachments ( spindle - laser - rotary driven lathe ) . How can i setup acorn to do this ??


Ed
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Setup profiles for Router - Laser - Lathe

Post by tblough »

Assuming all the limit switches and other connections remain the same, you can either keep a report for each setup and just restore rhe one you want to use, or you can keep separate directories for each setup and just rename the ones you want to use to CNCM and INTERCON.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply