Gary's Leadshine option appears to fit the bill nicely as the OP's original spindle motor is just 350w or approx 0.5hp.
I've no experience of this lathe or the Leadshine motors recommended but if Gary has done it, that would be good enough for me
Need help with spindle motor recommendations
Moderator: cnckeith
-
- Posts: 370
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Need help with spindle motor recommendations
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Need help with spindle motor recommendations
Small frame 3 phase motors can be found through TVT America. Quality is quite good:
https://www.tvtamerica.net/collections/ ... ainContent
https://www.tvtamerica.net/collections/ ... ainContent
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ