Not following you.rk9268vc wrote: ↑Mon Jul 18, 2022 12:07 am So im not crazy for asking for more than one MPG hand wheel?
https://centroidcncforum.com/viewtopic.php?t=6966
The way no one responded made me think i was crazy haha.
2pg.PNG
It is not out of the ordinary for a lathe to have two handwheels to mimic a manual lathe's handwheels.
https://www.centroidcnc.com/dual_handwheels.htm
It is a little unusual for a mill to have a handwheel for each axis, but not unheard of. I had a FADAL TRM that had a handwheel for each axis. Those handwheels were ON each physical Axis, that is on the table.
What is going to prevent you from turning the wrong handwheel?
It *may* be possible to add encoder inputs, but I would imagine this would be low on Centroid's priority list as they need to finish testing Acorn 6 and Hickory first before they work on any expansion modules IF they choose to supply them. I'll let Centroid comment on that.
You need to work on getting used to controlling your machine properly. Lots of ways to crash a machine.....
Marty