routeur cnc acorn auto construction

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: routeur cnc acorn auto construction

Post by Filardo »

Hello guys I wonder if there is not an electrical protection to add in the cabinet who would have an idea
Attachments
received_5236267253130359.jpeg
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: routeur cnc acorn auto construction

Post by cnckeith »

line filters are always a good idea
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: routeur cnc acorn auto construction

Post by Filardo »

cnckeith wrote: Wed Jun 29, 2022 11:04 am line filters are always a good idea
Hello, thank you for your answer
I heard about it but I don't see at all what should put
They told me to put a filter for the three power supplies and one for the vfd but I have no idea what to buy
If not Here is the beginning of my wiring and the position of all the components if something shocks you do not hesitate to tell me
PS can you send me a link for the filters with the power I have to put
Thanks in advance
Attachments
received_5236267253130359.jpeg
IMG_20220629_180818255.jpg
IMG_20220629_180832040.jpg
IMG_20220629_180904493.jpg
IMG_20220629_180925534.jpg
IMG_20220629_180930410.jpg
IMG_20220629_180955972.jpg
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: routeur cnc acorn auto construction

Post by ShawnM »

Here are some links to the last type inline noise filters I used on a retrofit build I did. I don't know if you have single phase power or three phase power but here's a link to both. These can be bought online from many suppliers like Digikey or Mouser here in the US, I'm not sure of a supplier in your country. The single phase units are about $20 USD and the 3 phase units are about twice as much. There are many other brands available but this will get you started as to what you can use.

Single phase line noise filters:
https://www.schaffner.com/product/fn2030

Three phase line noise filters:
https://www.schaffner.com/product/fn355
Filardo
Posts: 216
Joined: Wed Jul 28, 2021 3:54 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: routeur cnc acorn auto construction

Post by Filardo »

ShawnM wrote: Thu Jun 30, 2022 8:03 am Here are some links to the last type inline noise filters I used on a retrofit build I did. I don't know if you have single phase power or three phase power but here's a link to both. These can be bought online from many suppliers like Digikey or Mouser here in the US, I'm not sure of a supplier in your country. The single phase units are about $20 USD and the 3 phase units are about twice as much. There are many other brands available but this will get you started as to what you can use.

Single phase line noise filters:
https://www.schaffner.com/product/fn2030

Three phase line noise filters:
https://www.schaffner.com/product/fn355
Ok I understand better now what I need

Ok je comprends mieux maintenant ce qu'il me faut
Post Reply