Change Intercon Output

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Posts: 186
Joined: Sat Aug 11, 2018 11:22 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none
Location: Oregon

Change Intercon Output

Post by lavrgs »

Is there a way to modify Intercon output? For example it creates an end of program sequence that looks like this
; --- End of Program ---
;N0006 G49 H0 M25
G40 ; Cutter Comp Off
M5 ; Spindle Off
M9 ; Coolant Off
G80 ; Cancel canned cycles
M30 ; End of program
I have been going in and commenting out the line starting with N0006 because I don't want to lose my height offset.Is there a way to automagically comment it out?
Post Reply