It was set much lower. Thanks everyone.
Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Moderator: cnckeith
-
CivilCNC
- Posts: 68
- Joined: Wed Apr 07, 2021 11:16 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: will obtain
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
SOLVED. by setting screen resolution to 1980×1020
It was set much lower. Thanks everyone.
It was set much lower. Thanks everyone.
-
cnckeith
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
great, thanks for reporting back. yep cnc12 and vcp need to be at 16:9 and ideally at 1920x1080. the report.zip would have told me what resolution you have the PC set at:-)) that's why we are always asking for a fresh report.zip 
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
CivilCNC
- Posts: 68
- Joined: Wed Apr 07, 2021 11:16 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: will obtain
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
I dont know what a report.zip is
-
tblough
- Posts: 3102
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080
Take a look at Keith's signature in the post above.
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.