Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

CivilCNC
Posts: 68
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: will obtain
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Help! No Virtual Jog Panel when starting cnc12 *SOLVED* set screen resolution to 1920×1080

Post by CivilCNC »

ImageWhen I start cnc12 it loads in full screen with no virtual jog panel.
Even when I try to open it from the toolbar it doesn't pull up into position on the right hand side of page. When I hover over the VCP on toolbar its blank, and Grey. Thanks in advance
FB_IMG_1635309725058.jpg
FB_IMG_1635309733607.jpg
Last edited by CivilCNC on Wed Oct 27, 2021 3:44 pm, edited 1 time in total.
Upnorth
Posts: 237
Joined: Wed Apr 01, 2020 8:23 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1702
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Help! No Virtual Jog Panel when starting cnc12

Post by Upnorth »

ALT J should turn on the virtual jog panel.
ZZBOB
Posts: 31
Joined: Sun Mar 02, 2014 7:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 20915A (1124081904)
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: SO. TRENTON

Re: Help! No Virtual Jog Panel when starting cnc12

Post by ZZBOB »

HI THERE..
Check the link....
Win.10 tablet mode...
VCP-options...
Restart computer...
CivilCNC
Posts: 68
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: will obtain
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Help! No Virtual Jog Panel when starting cnc12

Post by CivilCNC »

ZZBOB wrote: Wed Oct 27, 2021 5:11 am HI THERE..
Check the link....
Win.10 tablet mode...
VCP-options...
Restart computer...
What link are you speaking of?
I did check tablet mode.
Whats VCP options can I change?

Thanks
ZZBOB
Posts: 31
Joined: Sun Mar 02, 2014 7:18 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: 20915A (1124081904)
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: SO. TRENTON

Re: Help! No Virtual Jog Panel when starting cnc12

Post by ZZBOB »

OK..try this...
DO a search NO KEY PAD.....
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Help! No Virtual Jog Panel when starting cnc12

Post by cnckeith »

Windows is most likely in tablet mode which causes this.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
CivilCNC
Posts: 68
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: will obtain
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Help! No Virtual Jog Panel when starting cnc12

Post by CivilCNC »

Upnorth wrote: Wed Oct 27, 2021 4:58 am ALT J should turn on the virtual jog panel.
This is what it looks like when I hit alt-J, there is no VCP options to select from this window- also it doesn't appear to be functional at all.

It comes up but way different
20211027_142650.jpg
Last edited by CivilCNC on Wed Oct 27, 2021 3:37 pm, edited 1 time in total.
CivilCNC
Posts: 68
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: will obtain
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Help! No Virtual Jog Panel when starting cnc12

Post by CivilCNC »

cnckeith wrote: Wed Oct 27, 2021 1:40 pm Windows is most likely in tablet mode which causes this.
Never in tablet mode
20211027_143046.jpg
CivilCNC
Posts: 68
Joined: Wed Apr 07, 2021 11:16 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: will obtain
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Help! No Virtual Jog Panel when starting cnc12

Post by CivilCNC »

ZZBOB wrote: Wed Oct 27, 2021 1:21 pm OK..try this...
DO a search NO KEY PAD.....
I'm not able to access VCP options thru the vcp, because the VCP never shows up for me.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Help! No Virtual Jog Panel when starting cnc12

Post by cnckeith »

post a fresh report.zip
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply