Hello All,
ist this possible to use one WMPG with two receivers for a mill and lathe?
I never use both machines at the same time.
Thanks in advance for your reply!
Kind regards
Mathias
2 Acorn Boards, one WMPG
Moderator: cnckeith
-
- Posts: 53
- Joined: Sat Aug 29, 2020 8:34 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn E415F6F6BFF1/0503203220 Colchester Lathe
and a Deckel FP1 with Acorn, both with WMPG - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
-
- Posts: 2179
- Joined: Sat Nov 18, 2017 2:32 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: Acorn 238
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Marquette, MI
- Contact:
Re: 2 Acorn Boards, one WMPG
1) Have you found a source to purchase a stand alone receiver?
2) Can you find another receiver with the same code number?
My guess is that if both above are yes, it would work.
2) Can you find another receiver with the same code number?
My guess is that if both above are yes, it would work.
-
- Posts: 199
- Joined: Tue Jan 15, 2019 11:40 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: 2 Acorn Boards, one WMPG
I think that a USB switch would work if the computers are not too far apart. Search for USB Switch on Amazon, most will allow 2 computers to attach to 2 to 4 usb devices, such as the rf antenna and maybe a thumb drive for storage of files etc.
-
- Posts: 1967
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: 2 Acorn Boards, one WMPG
Why not simply plug the receiver in the other computer?
Regards
Uwe
Regards
Uwe