Made first carve with centroid...
Moderator: cnckeith
-
- Posts: 23
- Joined: Fri Aug 20, 2021 4:54 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Made first carve with centroid...
After having to learn more about wiring my old high inductance motors than I realized...and amazing help from people here (Gary, Marty and several others), I brought the old shopbot back to life better than ever. I was asked to make a sign for a boy coming into the world any day. I went with the pro version of cnc12, I designed it in Vectric aspire (saved toolpaths as centroid -inch.cnc). After watching it carve..I stained and painted this first piece. It's a gift, so no money...but having the machine up and running is payment enough. THANKS to those who made suggestions, or helped out a wiring newbie. Someday soon I'll get it all installed in a much better case with a bit more room and cleaned up wiring. Right now Im just so pleased its a working machine!
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: Made first carve with centroid...
Nice!
Like an all new machine isn't it!? Welcome to the "DARK SIDE"!
Like an all new machine isn't it!? Welcome to the "DARK SIDE"!
Scott
-
- Posts: 7264
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Made first carve with centroid...
thanks for sharing, nicely done!
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html