Acorn 4 Power supply

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
pandrade8961
Posts: 23
Joined: Wed Mar 14, 2018 12:46 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Acorn 4 Power supply

Post by pandrade8961 »

I know this question has been asked and answered but I can't seem to find what I'm looking for.
I'm about to upgrade my 3 axis CNC router to the Acorn 4 controller. I have 3 NEMA 23 motors and thats it in the way of power requirements except of course for the Centroid controller.
My question is do I need more power than the power supply that comes in the kit? I've watched videos and it seems all are using additional power supplies. If I do need more power can I use a switching PS instead of 2?

This is my first time doing this and I've looked at most of the Centroid docs and I'm a big fan of MartysCNCGarage and I've learned a lot but just trying to make this first go a painless/success.

Thanks,
Peter
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Acorn 4 Power supply

Post by Gary Campbell »

You will need a separate and adequately sized power supply to provide current to your stepper drivers.
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
pandrade8961
Posts: 23
Joined: Wed Mar 14, 2018 12:46 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Acorn 4 Power supply

Post by pandrade8961 »

Thanks Gary!!
Post Reply