How to modify the main window?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Stuart1745
Posts: 2
Joined: Thu Sep 16, 2021 10:41 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

How to modify the main window?

Post by Stuart1745 »

so Ive read the documentation on how to modify the VCP. But I don't see how to modify the main window.

I want to add the Spindle speed in RPM, the feed speed in IPM, and possibly the time remaining. I see it on other menus but not the graph view. Is this possible?
CNC12 additions.png
cncsnw
Posts: 3763
Joined: Wed Mar 24, 2010 5:48 pm

Re: How to modify the main window?

Post by cncsnw »

No.
Stuart1745
Posts: 2
Joined: Thu Sep 16, 2021 10:41 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: How to modify the main window?

Post by Stuart1745 »

:ThumbsUp:
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: How to modify the main window?

Post by tblough »

That information can be viewed by toggling the F8 G-code/Graph button
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply