Hi there
Can anyone tell me which setting to change for time dwell for the spindle to wait when changing direction in tapping cycle? It should wait when returning and also when finished
Thank you
Tapping wait for the spindle to stop
Moderator: cnckeith
-
LenelyWolf
- Posts: 118
- Joined: Sun Jan 17, 2021 3:13 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
-
tblough
- Posts: 3098
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Tapping wait for the spindle to stop
Rigid Tapping Setup for Mill and Lathe (Acorn)
https://www.centroidcnc.com/dealersuppo ... ds/304.pdf
https://www.centroidcnc.com/dealersuppo ... ds/304.pdf
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.