Heartbeats stop when starting CNC mill (Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Heartbeats stop when starting CNC mill

Post by martyscncgarage »

hreinertsen wrote: Thu Sep 09, 2021 4:30 pm An update. The danish distributor is sending me a new card to connect. I suspect this is out of my league to find out for now anyway and after searching forum its at least not a common problem since i do not find anything close to this behaviour.
I got no logs to identify, and the only thing i am sure of is that the Firmware on the card that handle communications seems out of order.

Thanks Marty for your time, and thanks for all the videos you make and publish.
Hope you get somewhere.
You should have a CNCM or a CNCT directory on your computer.
In that directory should be a REPORTBACKUP directory.
I would be surprised if there is no report ZIP file in it. Not that we can glean anything from it BUT perhaps.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
hreinertsen
Posts: 7
Joined: Wed Sep 08, 2021 1:27 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Heartbeats stop when starting CNC mill

Post by hreinertsen »

An update. I got new controller and everything is function as expected.
Post Reply