Huanyang HY03D023B, 12000RPM Max Speed

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Going through the settings and now the Huanyang HY03D023B VFD maxes at 12000 RPM when 14000 rpm is typed into the MDI. Does anyone know what setting(s) would cause this?
Thanks
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by cnckeith »

your VFD needs to be calibrated to the 0-10 signal from Acorn.

viewtopic.php?f=63&t=1650
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Followed the steps.
Voltage from Acorn is correct.
Tuning the VFD- we get only one speed no matter what is set 12000RPM
Here are settings we used for a 3kw air cooled spindle.

PD001 0
PD003 300
PD004 300
PD005 300
PD006 2.5
PD007 20
PD008 220
PD009 15
PD010 8
PD011 200
PD014 15
PD015 15
PD070 0
PD072 300
PD142 8.6
PD143 2
PD144 2000
PD145 2.5
PD176 1
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Here is what I have.
Attachments
IMG_20210801_163503 (1).jpg
IMG_20210801_163512 (1).jpg
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Checked the spindle in Manual and everything works correctly. The VCP controls will allow be start and stop the spindle in auto but the plus and minus buttons do not respond.
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tblough »

It appears the VFD is not set up for remote control of spindle speed.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Latest Report. Checked Acorn's voltage outputs for the spindle bench test and all was correct.
Attachments
report_E415F6F250EF-0205202948_2021-08-02_17-37-31.zip
(1.99 MiB) Downloaded 67 times
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

PD001 =1
PD002 =1
These control remote control
Are there more settings?
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

A few more pictures.
Attachments
IMG_20210802_175823.jpg
IMG_20210802_175635.jpg
IMG_20210802_175623.jpg
IMG_20210802_175617.jpg
tblough
Posts: 3071
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tblough »

tuffduck wrote: Mon Aug 02, 2021 5:44 pm PD001 =1
PD002 =1
These control remote control
Are there more settings?
Since you haven't posted the VFD manual and I'm too lazy to hunt for it, I don't know if there are more settings.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Post Reply