Huanyang HY03D023B, 12000RPM Max Speed

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Hi Marty,
Setting PD005 = 180 gives the spindle one speed at 12000 rpm for all inputs on the MDI.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by martyscncgarage »

It does not sound like you have the VFD configured correctly. Did you move the jumper on the VFD per the notes?

Please create a sketch on how you have the VFD wired to Acorn
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

The jumper is on V1. Here is the diagram I used.
Attachments
IMG_20210804_173105.jpg
ShawnM
Posts: 2190
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 7804734C6498-0401191832
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Clearwater, FL

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by ShawnM »

In your wizard you have the "spindle min speed in high range" set at 12000, why? Set it to 0.
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

Changed the setting to 0, no change.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by martyscncgarage »

Have you tested the VFD from it's front panel?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

VFD works correctly from the front panel.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by martyscncgarage »

You can raise and lower the speed appropriately from the front panel?

You have bench tested Acorn's analog spindle speed output and it is functioning properly (Passed its test)?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by martyscncgarage »

tuffduck wrote: Mon Aug 02, 2021 2:31 pm Followed the steps.
Voltage from Acorn is correct.
Tuning the VFD- we get only one speed no matter what is set 12000RPM
Here are settings we used for a 3kw air cooled spindle.

PD001 0
PD003 300
PD004 300
PD005 300
PD006 2.5
PD007 20
PD008 220
PD009 15
PD010 8
PD011 200
PD014 15
PD015 15
PD070 0
PD072 300
PD142 8.6
PD143 2
PD144 2000
PD145 2.5
PD176 1
These do not appear to be correct based on notes sheet I posted
Did you change any of them?
I am attaching the manual I have for the HY VFD

Please revise the current settings you have. For PD001 setting of 0 only the front panel will control the VFD. Setting to 1 will use the external terminal blocks.
Attachments
inverter.pdf
(12.12 MiB) Downloaded 80 times
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
tuffduck
Posts: 359
Joined: Mon Mar 02, 2020 5:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Scotland, ON, Canada

Re: Huanyang HY03D023B, 12000RPM Max Speed

Post by tuffduck »

The speed can be adjusted correctly from the front panel. The model I have is not in the manual. PD003,PD004,PD005 cannot be set to 60. The spindle will not turn at these settings. These are the only setting I have changed after a Factory Reset.

PD001 1
PD002 1
PD003 300
PD004 300
PD005 300
PD006 2.5
PD008 220
PD011 200
PD014 10
PD015 10
PD070 0
PD072 300
PD142 8.6
PD143 4
PD144 3000
PD1PD176 1
Post Reply