Beaglebone heartbeat (Self Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
curiousMike
Posts: 63
Joined: Tue Sep 24, 2019 3:05 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Beaglebone heartbeat (Self Resolved)

Post by curiousMike »

I have one the boards with a dual function led "heatrbeat". At present I have a blue light on the beagle board that is not blinking but the "dual purpose" light on the acorn board is blinking between two colors... red/green. What does this mean?
curiousMike
Posts: 63
Joined: Tue Sep 24, 2019 3:05 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Beaglebone heatbeat

Post by curiousMike »

Problem resolved. I was looking at the blue light on wrong side of the ethernet adapter.
Post Reply