Probe Jog Parameters

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Hamm3rs18
Posts: 3
Joined: Wed Dec 02, 2020 11:42 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Probe Jog Parameters

Post by Hamm3rs18 »

I am not seeing the menu to change the jog speeds when a probe is plugged in.

Manual says I need "Proper PLC support" but what specifically does that require?

Parameter 153 is set to 1.000 //Probe Protection feature enabled

Any help is appreciated.

Thanks.
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Probe Jog Parameters

Post by cnckeith »

Use the Acorn Wizard to set the fast and slow probing rates, refer to the Probe setup guide here.
https://www.centroidcnc.com/centroid_di ... _setup.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Hamm3rs18
Posts: 3
Joined: Wed Dec 02, 2020 11:42 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Probe Jog Parameters

Post by Hamm3rs18 »

These setting do not affect the Jog speed when probe is plugged in.

I want to limit the MPG JOG speed when probe is plugged in..

Thanks.
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Probe Jog Parameters

Post by cnckeith »

Hamm3rs18 wrote: Wed Jun 23, 2021 12:22 pm These setting do not affect the Jog speed when probe is plugged in.

I want to limit the MPG JOG speed when probe is plugged in..

Thanks.
would take custom PLC program to do that. I suggest getting in the habit of using the Slow Jog mode in conjunction with the feedrate overide and x1 and x10 incremental when using incremental jogging.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply