Lost new style VCP with 12.64 upgrade

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
DrLocke
Posts: 73
Joined: Thu Jan 30, 2020 9:36 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0C1C57072225-0107202806
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Texas
Contact:

Lost new style VCP with 12.64 upgrade

Post by DrLocke »

I always have visions of disaster when I do an upgrade. LOL Saved working 6.2, did screen shots, ran the upgrade. Seemed to load after getting the ip address reset. Restored the working 6.2 report. Wisard looked good except wasn't able to access drives (grayed out) all else looked good. Restored license. Motors ran ok, Y axis looked off slightly. Then noticed that the VCP was the old configuration, not the new version.

Any Ideas on how to recover this? Maybe reinstall and hope for better results?

Thanks,
DrLocke
Posts: 73
Joined: Thu Jan 30, 2020 9:36 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0C1C57072225-0107202806
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Texas
Contact:

Re: Lost new style VCP with 12.64 upgrade - Resolved

Post by DrLocke »

Fixed with reinstall and selecting "Update Wizard" option when starting the Wizard. Now just have to update the VCP button functions.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Lost new style VCP with 12.64 upgrade

Post by martyscncgarage »

I assume you meant 4.64 version upgrade?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
DrLocke
Posts: 73
Joined: Thu Jan 30, 2020 9:36 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0C1C57072225-0107202806
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Texas
Contact:

Re: Lost new style VCP with 12.64 upgrade

Post by DrLocke »

LOL yes Marty, I meant 4.64 upgrade. Getting old at 76 I guess.
Post Reply