I always have visions of disaster when I do an upgrade. LOL Saved working 6.2, did screen shots, ran the upgrade. Seemed to load after getting the ip address reset. Restored the working 6.2 report. Wisard looked good except wasn't able to access drives (grayed out) all else looked good. Restored license. Motors ran ok, Y axis looked off slightly. Then noticed that the VCP was the old configuration, not the new version.
Any Ideas on how to recover this? Maybe reinstall and hope for better results?
Thanks,
Lost new style VCP with 12.64 upgrade
Moderator: cnckeith
-
- Posts: 73
- Joined: Thu Jan 30, 2020 9:36 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0C1C57072225-0107202806
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Texas
- Contact:
Re: Lost new style VCP with 12.64 upgrade - Resolved
Fixed with reinstall and selecting "Update Wizard" option when starting the Wizard. Now just have to update the VCP button functions.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Lost new style VCP with 12.64 upgrade
I assume you meant 4.64 version upgrade?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 73
- Joined: Thu Jan 30, 2020 9:36 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0C1C57072225-0107202806
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Texas
- Contact:
Re: Lost new style VCP with 12.64 upgrade
LOL yes Marty, I meant 4.64 upgrade. Getting old at 76 I guess.