Download Mill Operators manual here https://www.centroidcnc.com/centroid_di ... -v4.14.pdf
If you need a hardcopy, the Print button is your friend but I prefer the search function in the PDF itself
Note this is written for the Oak and All in One boards but the vast majority is applicable for Acorn too. Using the Wizard is straight forward and is well discussed on this Forum but feel free to ask specific guidance
Hope this helps
Z Axis only traveling in -neg direction...(Resolved)
Moderator: cnckeith
-
- Posts: 370
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Z Axis only traveling in -neg direction...(Resolved)
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"