Hi
I need information on how to install/wiring those together for it work.
The laser it install and what to add the new spindle and VFD to the router.
As compagny doesn't call the wire connection the same ways and don't want to make mistake so I ask before making a bad decision !
Thanks
Alain
VFD , LASER AND ACORN WIRING
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: VFD , LASER AND ACORN WIRING
You need to PROVIDE a link to the VFD manual. (and the make and model number of YOUR VFD)
We can *TRY* and make suggestions. Please understand, this is a forum for Centroid Acorn, not for other manufacturer's products.
Import VFD's can be hit and miss.
Marty
We can *TRY* and make suggestions. Please understand, this is a forum for Centroid Acorn, not for other manufacturer's products.
Import VFD's can be hit and miss.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 96
- Joined: Fri Dec 25, 2020 2:06 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: VFD , LASER AND ACORN WIRING
Ok Marty that vfd will be wired on a acorn board . Model is E550
https://www.simphoenix.com/uploads/dc24dd85.pdf
Thanks Marty .
https://www.simphoenix.com/uploads/dc24dd85.pdf
Thanks Marty .